Small objects for beginners, making leather bells

Be patient, If you are careful, nothing will be a problem. Main materials: vegetable tanned leather 7cm 7cm 2 sheets. Required tools: alcohol dye, anti-stain lotion, G-shaped clamp, leather knife, milky white glue, sanding strip, edge sealing liquid, sanding stick, mink oil , bell mold, plastic clip 6 production steps:

A piece of vegetable tanned leather!

Cut out 7 *The bottom two of the 7cm two are dyed (use alcohol dye and wipe it in one direction repeatedly until it is the color you want. After the leather is completely absorbed, wipe the anti-dye lotion)

Soak the leather in water for 30 minutes and then dry it . Align the leather with the mold, leaving 1cm around, and press down hard! ! Use all your strength to suck milk! ! (There are highlights later...)

Use the G-shaped clip to secure it, and keep twisting it until there is no gap at the edge. There must be no gap! ! !

My roommate and I twoPersonally use a stool! Every time I press, I use all my strength to suck the milk! ! Two G-shaped clips will make the pressure easier!

24 hours later , wait until the skin is completely dry, then take it out. Isn’t it as smooth as an egg? If you want to dry it faster, it is not recommended to use a hair dryer (I tried it once and the mold was heated and the leather was burned). You can only wait for it to dry naturally! !

Use the cutter Just cut the edge with a knife and make it nearly round, because it needs to be polished later. Use a small hammer to align the center and punch the hole! ! Don't miss it! Screw on the monk head and the upper part is completed