Author: Xiaojuezi & KITSU This time I made a puzzle coaster, which is designed to use scraps of leather. It is not difficult and very effective. Novices can practice it~Main materials: Several scraps of vegetable tanned leather. Required tools: A set of leather tools , several rolls of round wax thread, and a working table are made together:
Draw the pieces of the puzzle on the basis of the grid and compile the numbers
Cut it
Cut the leather according to the paper pattern, paying attention to the distribution of colors. At this point, I will tell you a shortcut, that is, there is a knife mold with puzzle patterns sold on a certain website. After buying it, the previous steps can be omitted. I was not willing to spend the money, which caused a headache for my cutting fingers. , the cutting is not perfect, and some parts are not quite right when I put them together...
I bit the bullet and managed to get it together, thanks to the elasticity of the leather~
Cut another 9×9cm square and print logo, used for posting. My logo is printed with a G clip. Someone has asked me this question before. Of course, hot stamping is also possible, but I have basically never done it because it can lead to disaster...
After pasting, use the rounding tool to cut the rounded corners. If you don’t have tools, you can find a plastic bottle cap~
This step is to polish the edges, not much here As I said, there are many tutorials on how to sharpen edges. I’m not good at sharpening them either, so I can just grind them casually...
Make grooves on the front and back of the groover so that the seam looks good~ (As you can see from the picture, my groover is It’s a bargain, just make do with it and cover your face manually (*/