Simple key bag handmade process

Key bag production It is not complicated to make, requires almost no skills, and does not require many tools, so it is very suitable for new leather art enthusiasts to make. Cowhide simple key bag Handmade Tools and raw materials: rivet tools, four-button installation tools, Rubber hammer, punch, lobster buckle, key row, 633 snap buckle, rivets, vegetable tanned leather simple key bag hand-making steps

First cut a piece of leather that is 180mm long and 110mm wide. I use vegetable tanned leather with a treated surface layer. The thickness is about 2.5mm

Cut a T-shaped piece of leather according to the size of the key row.

Measure and draw Good hole spacing.

First put the D The word buckle is fixed

Mark the location where holes need to be drilled.

Punch a hole at the marked position

Start fixing the key row. Note: The key row can be installed in reverse, depending on personal preference. I think it will not fall off easily.< p style="text-align: center;">

Use rivet tool to fix Key row.

OK! The key row is fixed.

Start measuring the fixed position of the snap button

After drawing the mark, start drilling.

Need symmetryPunch four holes.

Use Sihe Use the buckle tool to install the bottom buckle.

Bottom buckle installation complete.

Now install the cap buckle.

Key bag basic Once its done, if you don't want the edges of the leather to look rough, just apply edge glue.

The key bag is at It is used frequently in daily life and may crack if folded back and forth frequently for a long time. Therefore, it is not recommended to use leather with a relatively hard texture. It is best to use leather with a moderate hardness that is rich in oil. For example, Crazy Horse Skin

If you also like it, you might as well try to make one yourself.

Key bag