Make a Mini Leather Bucket Bag

Today I will make a mini Leather bucket bag, used to carry ARMY BOMB, the official support stick (ARMY BOMB) of South Koreas BTS Bulletproof Youth League

Step 1: Design and Sketch

I drew a sketch with reference to the cheer stick. I sketched it out, imagining a cylindrical bucket bag. Step 2: Cut the bottom.

Cut the leather from the bottom i If you don’t use a round cutter, you can also cut them using the drawing. Step 3: Make the bottom

Attach the strap to the seam line. Step 4: Paste the bottom

Apply glue to the edge of the strap you made. When the glue dries, sew the outside of the bottom of the attachment following the center mark. Step 5: Cut the main part

Cut the leather according to the pattern. Make holes in the circle of the pattern. Do two steps. 6: Combine the main body with the inner band.

Cut off the strap that will be attached to the inside of the body (in the pattern) Body: Glue 5mm Connect the edge part to the main body with a tape and then make a pinhole. Step 7: Cross splicing

Connect it to the cross EmbroideryStep 8: Cross stitching 2

< /p> Repeating the same way for the other side of the /img.111diy.com/d/file/p/74a387bd5f124a246f74e9ad0437b1f5.jpg" alt="">

Next, it joins the body and bottom together. Step 10: Add offset top edge

The thickness of the biased leather is 0.4t and wrapped. Step 11: Make a string

Make a rope to tighten the entrance I added reinforcements for the rope reinforcement Step 12: Make the shoulder straps

< /p>

Shoulder strap thickness is 1 ton if cut and folded ends into pattern. Sew the entire edge of it in a semi-circle and sew the straps and body Step 13: Done:-)

Thank you for watching!