Vegetable tanned leather shoulder bag Shoulder Bager

Author: Wu Zhi, WeChat: 309790637 Vegetable tanned cowhide shoulder bag Shoulder Bager skills: installation of bag lock, three-dimensional composition of bag, production of shoulder strap Detailed production steps:

Materials: vegetable tanned leather, zippers, locks, hardware accessories, bed surface agent , hand stitching, leather glue tools: spacing gauge or edger, leather knife, diamond chopper, hammer, mat, needle, edge trimmer, frosting rod, glue card installation lock

Use a flat chop at the corresponding position of the skin piece ① hole, making sure it is level and centered.

Insert into the punched hole, pay attention to the direction

Put the iron piece used to fix the lock head at the corresponding position on the back of the lock head.

Use your fingers first Fold the four extra sharp corners on the back of the lock slightly inward, and then tap the four sharp corners with a hammer to make the back of the lock flat and firm.

Attach a piece of leather to the back of the lock material for suturing.

< /p>Use a spacing gauge to draw a reference line along the edge of the lock.

Use a diamond punch to drill holes on the baseline around the lock head.

Please use a two-tooth diamond chopper to punch holes in the arc part.

Sewing

< img src="https://img.111diy.com/timthumb.php?src=/d/file/p/af78fe42bf4330e4fde2e0104feb25e4.jpg" alt="">

For specific stitching, please refer to previous tutorials, or search for corresponding keywords.

In the remaining three parts of ① skin graft Plan the baseline with spacing on both sides.

Draw baselines on both sides of skin graft 3.

First in ① Drill holes on the baseline of the skin graft, and use a two-tooth diamond chopper to drill holes on the arcs of the two legs. After drilling, count the number of holes punched.

Then continue on ③ skin graft Punch the same number of holes. Tips: Every time you count 20 holes, you can mark the two edges with a pencil or silver pen. Cut off excess leather

< /p> Mark the required length on the ③ skin piece.

Use a ruler Cut off excess leather with a utility knife. Shoulder strap D-ring installation

< /p>

Adhere as shown. Punch holes

Combine ② skin graft and ① skin graft Align the bottom and punch holes at the symmetrical position of the ② leather piece. Install the lock

Place the lock buckle in the center of the upper edge of the ② leather piece, and press it with your fingers to fix it slightly.

Use a hammer to hit the reverse side to make the lock fully fixed on the leather. Sew the bag Body

Place ①③ The edges of the skin graft are aligned and fixed with clips.

In order to ensure accurate stitching, please remember to align the 20 hole marks made with a pen before.

Note: Just fix it The straight part on one side is enough, and the position below the arc does not need to be fixed for the time being.

Use the same method to align 20 holes At the mark made, fix the skin grafts ②③ and suture.

Sand the edge of the leather bag with a bed Facial treatment is smooth.

Shoulder bag