I made a windfall cloth wallet. Please give me some advice for newbies.

I made a windfall cloth according to the simple pictures on the Internet. Newbies can give me some advice. Main materials: Tools required for vegetable tanned leather: colored leather knife, edger, edge trimmer, white latex, leather super glue, sanding rod, awl, wax Line production steps:

The drawing is laid out and cut, I use 1.5mm vegetable tanned leather

The card slot bag on the left is chiseled. I hesitated to buy the drawing with the holes drilled, so I can only drill the holes carefully

Chiselled outer skin

After the lower skin of the card position bag and the inner skin of the banknote position are sutured, the upper skin of the card position bag is aligned< p style="text-align: center;">

Use strong glue合

Reverse effect

Awls and needles mostly account for wax

Card position package stitching

The coin purse on the right is ready

Look at how the coin purse looks when turned down

Coin purse stitching

Skin preparation

Align

Superglue

Pay attention to polishing the bonding area

Sew a circle of thread on the outer skin. In order to be perfect, I sewed it in place in one go. The thread was super long, far beyond my arm span. I made a mistake and failed to sew it. Arm discomfort

Edge Flatten, note: the leather knife must be sharpened very, very, very quickly, otherwise it will be difficult to use

Shovel skin

It is finished after edge sealing and polishing. I used bed edge sealing and the effect was not good. Please pay attention next time

Thank you everyone

A little bigger than the wallet I use

Medium thickness

Windfall cloth wallet