Leather box made by horse stitching

First time Let’s do it. You can look at it and ask whatever you want. I have been thinking about it and preparing for it for a long time. Finally, I calmed down to draw a picture and calculate the dimensions. I guess it was just a success. Several problems have been solved and I know a few points for improvement next time. Main materials: vegetable tanned leather 4.0, about 3-4 feet long. Tools required: leather, 3-4 feet long, tools. Several production steps:

First cut the material according to the size of the drawing you drew, and then bevel it at 45 degrees. There are two methods of beveling: 1. Use a beveling tool to complete the beveling, which is relatively simple. 2. If you need more angles, calculate the distance between the edges, and then hand-sharpen the knife at an angle. This requires more experience and feel.

This is four The combination of side skin and ground

The result after sewing the four sides

I put the bottom skin directly in and glued it all around

Box within box structure

Outer box and base

Structure

The effect after the bottom box is closed

Effect

Effect

You should be able to understand the structure< p style="text-align: center;">

This is the top of the lid Pi

The structure of the lid, with some ribs on the periphery

The upper part of the cover is not attached to the cover

This is to put the inner side of the skin, because there are two layers

Place the cover effect

Sewing the edges, I also cut the edges to eliminate Gaps in seamed edges

Finished product

Tips for the finished product: Because it was done intermittently at night, it took a long time. The main feeling is that it is beveled, and drilling holes is difficult. The leather must be thick or it will not be easily deformed, resulting in the inability to make it. Original text: https://www .shougongke.com/course/478363.html

Jusui  box