p>The following are pictures of the production process and some technical introductions: First, cut the outer cover of the book cover, leaving a margin for wrapping around it.
Hemming on all sides The part is thinnedSimilarly lay down the material for the lining of the cover and thicken it with leather bran paperGlued to the cover partThen there are some internal components. The production process is basically the same. Take the bill position on the outside as an example: first glue it on the leather at the bottomApply reinforcing tapeApply a large circle of leather Fold the extra part over and glue it in placePunch stitchingThe edger draws the cutting lineThe following are the key tips, cut a small pieceCans are padded underneath , use a knife to carefully cut off the excess hemmingKnock it flat, this part is finished, and other internal parts are made in the same way. Below is the pen The insertion is made, and the inside is reinforced with reinforcing tapep>The pen insert is combined with the internal insert
Sewing buckle Gluing and hemmingAdhere the corners evenlyPunch stitchingCut off the excess part of the edgeComplete! The overall style is business styleThe classic combination of dark brown and yellow.Round edges, excellent hand feelThe pen plug structure is our original The design minimizes the width of the entire book while maintaining its beauty and usability
Laptop Leather Case Handbook