Author: Dot Handmade Weibo: https://weibo.com/u/2846629064 As a playful person, I always have to get myself something that I can use to show off, so make yourself a cigarette bag. . Although I smoke often, I still have to control my smoking, so I have this cigarette pack that can only hold 12 cigarettes. By the way, I will record the process to facilitate communication with everyone. Detailed production steps Production tools: French chopper, utility knife, ruler, awl, four-button punching tool Production materials: mbox cowhide, buttero cowhide, split leather 1. Pattern making and cutting
2. Place the inner and outer skin materials according to the pattern (here The outer skin uses mbox, and the bottom skin uses buttero)
3. Cut the core material according to the pattern (for better protection, two 1.0 second-layer sheets are used as the cushion core)
4. Paste the core material and use The edges of the large size are rounded and the effect is fuller and rounder when the drum is formed
5. Use a scriber to draw an edge on the back edge of the base
6. Fit the core material along the edge, then attach the outer skin, use a deer bone stick to shape the edge, and then DaZhan
7. Use a small sanding rod to shape a base Dimple
8 .Drill the hole and install the snap button into it
9. Put on the logo and the front part comes to an end
10. Use the same method to fit the back piece, but pay attention to the curved surface fit
< img src="https://img.111diy.com/timthumb.php?src=/d/file/p/8f2b6f5242309ff4cef125e00f4ceb56.jpg" alt="">
11. Use the same method to shape the cover and punch holes
12. Kill and pretend The snap button on the other part
13. Pay attention to shaping the ditch first and then cutting it
14. Next is the process of assembling and sewing the front and rear panels and side panels
15. Complete assembly and stitching
16. Don’t forget Edge sealing
17 .Insert the acrylic tube into the cigarette bag, remember to apply a little glue for positioning and fixation
18. You can stuff your cigarette
Cigarette box