< /p>
1. First Use 400-grit sandpaper to polish the phone case, especially the edges and corners that need to be polished carefully. Grinding the back of the phone case rough can help make it more secure with glue. 2. In Apply glue to the back of the phone case. An appropriate amount of glue is sufficient, and it does notThe more the better. 3. Apply the film evenly Apply glue. Apply the glue as thinly as possible, but it needs to be applied in every location. 4. The same method is Glue on the back of the pink French goatskin. You can see on the back of the leather that my glue was applied very evenly and very thinly. 5. Place the surface of the phone case on the back of the leather and press it with a little force. 6. Pull with a little force Stretch French goat leather to make the leather surface stick betterFits the phone case. Especially at the edge corners, there are slight wrinkles. Stretch and adjust several times to achieve a natural fit. 7. Approximately The effect is shown, the large surface and the edge corners are all smooth and smooth. 8. Use a utility knife to cut Cut off the excess leather and carefully cut it according to the edge of the phone case. Slowly cut several times at the corner of the edge. 9. Cut the skin of the phone case camera material. As mentioned before, the mobile phone case shared this time is an iPhone 6 plus. The black mobile phone case I bought only needs to be cut out for the camera position. Other brands or models or the phone cases you buy are different, and the number and shape of the positions that need to be hollowed out are also different. Let’s analyze specific issues in detail. 10. After cutting, the glue may not be applied to some parts of the edge or may not be firmly adhered. situation. Just add a little glue.11. Use 400-grit sandpaper to polish the edges, paying attention to sanding from the leather surface to the inside of the phone case.12. After polishing, you can see that the edges have been smoothed a lot. 13. Adjust the required edge oil color, use an awl to slowly! Apply in small amounts! Evenly! On the edge. 14. After the first edge oil dries, you are still not satisfied with the edge sealing effect. Use sandpaper to continue polishing the edges. Smooth the uneven areas. 15. Follow the previous technique for the second time The edges of the skin are oily, waiting to dry. Finish!
Mobile phone case