Sheepskin zipper long clip handmade diy tutorial

A very detailed tutorial on how to make a long zippered wallet. The style is a relatively classic style, with multiple card slots and banknote slots. It is made of sheepskin and has a delicate feel. Production material: Italian matt sheepskin 5-6sf Author: Bandiaoyanyu (Weibo https://weibo.com/u/6395570349) Cutting 1. Inner skin: cut according to the exact size Japanese paper: shape, use inner skin Cut the cardboard according to the comparison. The size is from the upper edge of the inner skin to the bottom edge of the outer clamping position. See the picture with adhesive nylon: the long clip in the middle of the two outer clamping positions is reinforced. The blanking can be slightly longer

2. Upper card position and middle card position : 2 each, leaving a margin for folding on the upper edge, and leaving bleeding spaces on the left and right sides. Lower card slots: need to be folded in half, with a width longer than twice the exact size, leaving bleeding spaces on all four sides. Adhesive nylon: each card slot is equipped with a backing piece. Reinforced with rubber nylon, the cutting material is slightly larger than the clamping position, and one long side is cut in a straight line

3. Accordion pleats & zipper bag. Accordion pleats: 1 piece of small accordion, 2 pieces of large accordion. Paste the leather and cut out the zipper bag: one each for inner and outer skin, leave aside Bleeding spots on the left and right, leave a margin for folding on the top and bottom of the outer skin

4. Large outer surface: Cut out the outer surface according to the size. Cut the inner bran paper according to the large surface size.Layer-to-layer leather: Slightly larger than the size of the large surface. Cutting material 1. Press the lower edge of the card on the back of the large surface of the inner leather and mark the large surface of the inner leather. Paste adhesive nylon reinforcement in the middle of the two marking lines. Large inner leather. Stick Japanese paper on the back of the material along the edge to shape

2. The four sides of the upper and middle card positions are thinned, so that the edges transition naturally after being folded or sewn to the inner surface

Draw folding lines on the backs of the upper and middle card positions, and fold the straight edges of the adhesive-backed nylon Attach the edges, apply glue and fold them, and press them firmly

Cut off excess adhesive nylon along the edge of the leather

Draw a folded center line on the lower card position, stick the adhesive-backed nylon along the center line, fold it in half and press firmly, and sandwich the adhesive-backed nylon in the middle

The lower card position is cut off according to the accurate pattern. For the extra margin, do not move the bleeding positions on both sides for now

Make 6 card positions

6 card slots with hot decorative lines on the upper edges

Draw the card position on the endothelium Marking lines are installed on the upper and lower edges, and the alignment marking lines of the upper card position are affixed to the large surface. The lower edge of the pasted upper card position is cut with stitching lines

Similarly install 6 card slots (the lower edge of the lower card slot should be oiled first)

Cut off excess according to the exact pattern Bleeding position

card Draw a vertical line on the center line and cut the suture

Complete! 3. Cut the zipper of the zipper bag to the appropriate length, pull out the excess teeth, install the top stop, and leave space for the bottom stop. Use a lighter to slightly iron the edge of the fabric. Note that if it is a one-way zipper, do not install it. Wrong side

The upper and lower edges of the outer skin of the zipper bag are thinned, the folding lines are drawn, and the folding edges are pressed firmly

The zipper is centered and attached to the upper and lower edges of the outer skin. Note that the zipper can be aligned and closed after the outer skin is folded in half

Oil the upper and lower edges of the inner skin, and stick them to the back of the outer skin, aligning the upper and lower edges. Sandwich the zipper cloth in the middle

< /p>Hot decorative lines on the upper and lower edges of the outer skin

Cut the left and right sides according to the exact size of the zipper bag

The upper and lower edges are cut with sutures, and the left and right edges are cut

4. Oil the upper and lower edges of the accordion pleats, thin both sides of the small accordion pleats on one side, and the edges where the large accordion pleats fit with the zipper bag are on one side. Cut it thin and make holes on the edges

Fold the zipper bag in half, attach a small accordion pleat to the middle of the lower end, and a large accordion pleat to the outside, and sew them separately

The other side fits the large accordion pleat

Use the upper slider and install the zipper bottom

Install the bottom end of the zipper The inner edge is glued and stitched

Oil on both sides of the zipper bag

Beat the edge of the endothelium

The large accordion pleats are attached to the large edge of the inner leather, and the upper edge of the accordion pleats is aligned with the upper edge of the upper card position

The shallow round punch creates a concave arc in the middle of the inner lining to provide space for the zipper

5. Leave the zipper a little longer, and you can make a circle around it. Use a border marker to mark the back of the inside 5mm from the edge. Take the center point of the zipper and align it with the center point of the inside and back. The long edge should be flat and the two short edges should fit together well. Do not apply glue on the corners

Use an awl to dip it into glue and fit it to the zipper cloth with arc corners. Use the awl each time Pick a little bit of zipper cloth and fit it as flat as possible

Pull the head up and pay attention to the direction of the pull head

The remaining zipper should fit outside the inner bend, and the corners should fit as flatly as possible

6. Cut the outer bran paper along the scored line 5mm from the edge

Center the bran paper on the outer skin

The outer skin bulges plastically along the bran paper

Fit the outer skin and inner layer, pay attention The middle part is bent to fit

< /p>

Use a shaping rod to shape and stick it firmly, make holes on the four sides, and press the decorative line

Oil on the edge

7. Align the cut holes on the outer skin and inner lining of the overall installation. You can use needles to position them and sew on all four sides. Complete!

Zipper long clip