Cut the leather according to the patternStep 3: Making a Handle (step1)
< /p>Fold the handle in half and sewSew 21cm in the middleEdge-painting on the side of handlesStep 4: Making a Handle (step2)
Prepare 8mm thick rope for handlesTape the ends to prevent them being loose strandsPunch a hole in the centerPut the PP string through the centerPull it all the way and you can put the rope in the handleCut the tip of the diagonallyMake one more, and handles are done ~!Step 5: Apply Edge-paintEdge-PaintingStep 6: Making Bottom Part< /p>
Mark where the handles will be attachedPut the handles and stitchStep 8: Making a PocketCut the lining following the patternPut the zipper on the frameStitch both sides of the pockets liningStep 9: Combine AllAttach inner lining with outer leatherApply bond on the straps for side bandCombine the sides of the main body with side bandBond and stitch side bands to combineStep 10: Making a PipingPut the piping around the bottom partMake some slits for cornersSew around the pipingStep 11: Combine Body and Bottom< /p>
Sew the main body and bottom part to combineAnd turn inside outStitch around to put bias on the body topStep 12: Put ButtonsMake a hole for put dot buttonsTip.Mark the buttons positionbefore combining body following the patternI used 15mm dot buttonStep 13: Done!
< /p>
Thanks for watching! : )