Home > Handicrafts of life > Handmade leather goods

Three-dimensional business card holder production process

Author: Wuhan Xiaomu, WeChat: 4801433

Three-dimensional business card holder production process

The production process is not difficult, but it is still difficult for novices to make templates. It can be used as a reference! Main materials: 1 foot of sheepskin, 1 foot of vegetable tanned leather. Tools required: 1-2 sets of choppers, a can of glue, a leather knife, 2 needles, a small amount of thread, a shaping tool, a suture clip, Use a chopping hammer, a small amount of edge sealing liquid or edge oil, and a 30cm steel ruler. Production steps:

Three-dimensional business card holder production process

Cut out the cushion core and dough or lining

Three-dimensional business card holder production process

Install snaps on the lining

Three-dimensional business card holder production process

The dough or lining and the cushion core are accurately bonded

Three-dimensional business card holder production process

Roughly cut the main surface of the dough or lining and the freshly made strips Partial bonding of the cushion core

Three-dimensional business card holder production process< /p>Use the shaping tool to shape the bulging part

Three-dimensional business card holder production process

Cut off the excess part after shaping

< img src="https://img.111diy.com/timthumb.php?src=/d/file/p/342f180a9ea29f6860669d952f86f263.jpg" alt="">

Cut out the cushion core and the dough or lining of the card position before rough cutting

Three-dimensional business card holder production process

Glue it< p style="text-align: center;">Three-dimensional business card holder production process

Accurate release requires For the suture area of ??the drum, the 5 mm I placed can be used as a reference

Three-dimensional business card holder production process

Cut accurately according to the released line and roughly cut the dough or lining in the front position

Three-dimensional business card holder production process

Glue and drum

Three-dimensional business card holder production process

Cut the excess part and install the snaps

Three-dimensional business card holder production process

Glue the side panels together and then score

Three-dimensional business card holder production process

Cut it accurately according to the marked line

Three-dimensional business card holder production process

Cut the three pieces of skin

Three-dimensional business card holder production process

Sew the top line of the card position and the side panel first

Three-dimensional business card holder production process

Sew the card position and side panel

Three-dimensional business card holder production process

What it looks like after sewing...

Three-dimensional business card holder production process

Will sew The card positions and side panels are then sewn to the main surface

Three-dimensional business card holder production process

After sewing is completed, use edge sealing fluid or edge oil to treat the edgesThree-dimensional business card holder production process

Complete

Three-dimensional business card holder production process

This is what it looks like after snapping... small Tips: When designing the side panels, it is recommended to put a longer size on the side panels at the rounded corners connected to the card slots, usually 2-3mm, depending on the thickness of the leather selected

Business card holder