Pictures of DIY handmade warm Japanese cotton slippers

Japanese style home slippers are famous for their The simple style and quiet colors are loved by many people. The simple yet classic design is very characteristic of home. Below is a warm homemade home slipper tutorial, let’s learn it together.
Materials required for making your own home slippers:
Half a yard (0.5 meters) of cotton fabric to make the upper layer of the slippers, half a yard of non-slip fabric to make the bottom of the slippers, flannel towel fabric is more suitable for making Such home shoes.

Half a yard of fabric to make slippers For the lining, if you are making slippers for summer, you can use cotton with better air permeability. If you are making slippers for winter, you should choose something with better warmth, such as wool, felt, etc.

First we need to measure our feetthe size of. Put the flip-flops you wear on daily basis on the cloth to draw the outline of the slipper sole. Then spread the cloth on the ankle and draw the shape of half of the instep. Then fold the cloth in half and the cut out area will be the spread area of ??the instep. . Note that you need to leave room for sewing, about 1/4 inch.

Cut two outer parts separately The shape of the slippers from the fabric and lining fabric is as shown in the picture, and then cut three pairs along the outline of the flip-flops. One pair is the upper fabric of the slippers, one pair is the breathable cotton cloth, and the other pair is the bottom of the slippers.

Put the outer fabric of the sole , lining fabrics are stapled together and sewn along the edges. Sew the opening of the lining fabric of the upper as shown and put the right sides together. Attach the lining to the sole and sew along the edges.

Now sew the tail of the upper outermost fabric of the slippers, aligning the right sides. Fold it, sew the upper end of the outer layer to the outer lining, align the right sides, and tack in the reserved place for sewing, because there will be holes in the fabric or leather. After sewing, trim off the raw edges.

Push the lining into the shoe Inside the shell, sew the previous opening, and it’s done. It seems a bit complicated to repeat these steps back and forth. Please look at the pictures carefully and study the order of these layers of fabrics carefully. Of course, if you encounter any problems during the production Mistakes are normal, and it’s not difficult at all as long as you have patience.

Take the slippers out , do not bend the material to avoid leaving marks. Please note that the outside of the slippers is plaid cloth, the lining is felt cloth, and the bottom is non-slip cloth.

Put the turned shoes into the sewn lining, fix it with pins, sew on the outside, and finally leave a space at the slipper opening for easy removal later.

Pull the lining out of the right side opening, being careful not to break the stitching, so the two pieces now look like two identical pieces.