The combination of sky blue cotton fabric and white pattern stickers gives you a blue sky and white clouds full of summer atmosphere, making people feel warm and fresh even in winter. The small pink flowers on the buttons make the slippers cute. Preparation materials: thick 3 pieces of cotton cloth, pins, buttons, pattern stickers, needle and thread, pen, scissors, iron. Use scissors to cut out two patterns you like from a large pattern sticker. It is recommended that the size should be moderate and not too big, so that the entire slipper surface can be covered. Just enough fabric to accommodate it. Use a piece of cardboard to measure the size of your feet and cut it out to use as a template. On thick cotton cloth Cut out two pieces each for the top, middle and bottom. For a pair of slippers, cut out 6 pieces. The piece with blue dots here is the thickened layer in the middle. For the upper, Basically, it is treated like the sole, but it is worth noting that when drawing the upper on the cardboard, it is best to only draw half, so that the mold printed on the fabric will be symmetrical. To use fabric here, you only need the upper and lower layers of fabric. The middle layer of fabric is not needed here. After cutting, put it together with the insole. Observe the overall effect. Position the cut out white pattern on the upper and prepare to print the pattern on it. The pattern is printed on the fabric After applying it, iron it twice to make it fit the fabric more closely. Once its firm, sew button decorations on top. It is worth noting that the position of the buttons must also be grasped, otherwise the left and right will be asymmetrical. Put the uppers The upper and lower layers of fabric are sewn together. The editor here recommends not using a sewing machine. You can sew the fabric inside and out by yourself. If you grab the fabric, the fabric will not turn out so easily. Align the three layers of fabric on the sole and sew them after fixing them with pins. There is no need to grab the seams here, just sew them along the edges. The sewn bottom is as shown in the picture. Finally, sew the sole and upper. There are two ways to sew. You can The ground of the sole is sewn to the ground of the upper. After sewing, turn it over so that the thread is invisible. Another way is to use the grabbing seam as shown in the picture, which echoes the grabbing seam of the upper.
The lovely slippers are completed, soft and warm, giving you a warm autumn and winter season. If your home is decorated with wooden floors, such soft fabrics can also reduce the wear and tear of the wooden floors.