We know that online stores often sell pictures. Whether the transaction can be facilitated often depends on whether the pictures can be more beautiful and attractive. Therefore, such a photo studio is more important. So, let’s try making some together!
Materials for handmade DIY small photo studio:A square table, tape, utility knife
A black high-gloss ceramic tile (600*600), which can make the product picture appear in the When shooting, the reflection is very beautiful, which can arouse customers' desire to buy.
A piece of pure white matte ceramic tile (300*300). Why do white ceramic tiles need to be matte? Because if it is a high-gloss white tile, the reflection is very strong. If it is not mastered well, it can easily cause overexposure, which will be reflected in the picture as a pale white. Therefore, matte ones can also have a certain soft light effect. One thing is very important. 4. 3 desk lamps with clamps: equipped with spiral energy-saving lamps, each 27 watts. Table lamps are 10 yuan each, and energy-saving lamps are 14 yuan each. You can choose the number and wattage of lights according to your actual situation.
3 desk lamps with clamps: equipped with spiral energy-saving lamps, each 27 watts. Table lamps are 10 yuan each, and energy-saving lamps are 14 yuan each. You can choose the number and wattage of lights according to your actual situation.
A piece of waste white foam can be used as a reflector. Reflectors are very useful for commercial photography, especially when shooting objects with multiple reflections, so that the reflective surface will not appear shadowed or blackened. Professional reflectors are relatively expensive. We can fully carry forward the DIY spirit. Firstly, it costs almost no money. Secondly, it is more satisfying. I just used the foam used to install the air conditioner and it was done. Tip: In fact, mirrors can also be used as reflectors, but mirrors are heavier than foam, difficult to fix, and there is no foam for easy cutting. In addition, according to your actual needs for reflection, you can appropriately paste a layer of tin foil on the surface of the foam for better results.
Handmade DIY small photo studio method:
1. The soft light box box is made of hard calendar paper with four sides, each sideThey are equilateral trapezoids of exactly the same size and shape. 2. Then stick tin foil paper on the inner wall of each side to enhance the diffuse reflection and intensity of light
3. Then use transparent tape to bond the four sides of the box.
4. Then use white sketch paper to seal the front opening
5. Finally, dig 2 holes on the left and right sides of the formed box, so that the light tube can just fit in. . Finally, put the tiles on the square table, put a homemade soft box on one side, add a reflector on the opposite side, and configure the light source according to your needs. A simple photo studio came out. How to build a simple photo studio to light small commodities:
First, let’s make our own Two reflective boards, find two pieces of cardboard, paste A4 paper on one side (if the cardboard itself is white, there is no need to glue it), then fold the cardboard in half to make sure it can stand up. 2. First find a flat table, lay out A4 paper according to the size of the product being photographed, and raise the A4 paper behind it to serve as the background. 3. Turn on the white light table lamp, as shown below, so that the light of the lamp shines on the top and front of the product.
4. Place the reflectors prepared in the first step on both sides of the product as shown in the picture. You will find that the light on the product is relatively full. 5. Adjust the SLR camera to AV mode, that is, aperture priority. In order to retain all the details of the product, it is recommended to set the aperture a little smaller. 6. Finally, let’s compare the effect before lighting and after lighting. Is it much better? We also keep the same distance when taking close-ups of people. Put a piece of white paper under the persons face, and the skin color on the face will be much brighter. 7. If there are multiple light sources, we can also try multiple lighting patterns to make the objects more vivid and full, and the picture more textured. Just pick up your camera and give it a try.