The production process of handmade leather EDC key bag

Sharing a handmade leather keychain from kiniii.
Many students left messages saying that for a long time, we have shared very few tutorials, especially leather goods, but the editor is also in a dilemma.
The content that is too professional will be read less, and the more professional it is, the less it will be read.
But students’ opinions always need to be listened to, so we decided to share tutorials and life ideas every Friday.
Supported or not? Or what kind of content you want to see, please leave a message!

It’s been a while since I shared the production process of some of my own works. This time I will continue the unfinished edc series - edc key bag.

Why is it called edc? Because it is small and suitable for carrying around. As a straight man, he is absolutely not willing to bring a lot of things with him when going out, but he does not want to be missing anything, so this series is created.

1. First take three pieces of leather, namely The dough, lining, and a piece of core skin are cut into pieces that are larger than the size of the pattern.

2. Apply the lining and core material Glue, glue everything

3. The appearance of glue application

4. Posting

5. Use heavy objects to hold the attached leather Compaction, here we use Dharma code to roll back, you can also use other things instead

6. Accurately place the lining according to the pattern Cut it out and punch the holes

7. The finished look

8. Thin the edges diagonally. You can use wide Shovel, thinning knife, 801 peeler, etc.

9. The next step is to prepare for the post. Only the edges are glued here. Because the curved surface needs to be joined next, the outside needs to be pre-larged. Therefore, lines are drawn on the back of the dough first, and then glue is applied around the lines.

10. There are two curved surfaces here, which fit Pay attention when

11. After finishing Make precise cuts along the edges, being careful not to cut into the inner skin

12. The finished look, I forgot here Shoot, I've already installed the four-button buckle.

13. The next step is the installation of the four-button buckle , the dark side drum buttons from thk are used here, unconventional usage

14. The last step is to draw the edge lines and cut and seal the seams., these basic processes will not be shown, friends who are into the trap should be familiar with it.

Tips:

The leather used in the production is Italian vegetable tanned cowhide, thickness 1.5, lining 0.6 French goatskin, cushion core 1.0 vegetable tanned two layers, for reference.