Use scraps of leather to DIY a leather card holder. It is small, practical and easy to make. If you like it, come and learn how to do it~
Template download [click here].
Material preparation: leather, wax thread, awl, steel ruler, cutter, milling cutter, head cutter, hammer, 3mm hole punch, wing divider, sewing spacer, sewing needle, scissors.
Print the template and prepare enough leather.
Use an awl to mark the outline and hole locations.
Use a utility knife to cut the leather along the marked lines.
Use a 3mm hole punch and hammer (or rotary punch) to punch 8 holes, and then draw a straight line between the 2 holes.
Using a spacing gauge, mark the stitch locations.
In order to ensure that the stitches are evenly spaced, use the spacing wheel to punch holes along the lines just planned for the spacing, and then sew.
The holes for the first seam should be the same distance apart from each stitch, and the corners should also be the same distance apart.
Suture along the previously marked hole.
Seal the wax thread ends and cut off the thread ends after sewing.
Burn it with a lighter.
You can use a spacing wheel to process it again along the suture line.
Simple leather card holder DIY completed.
