Have you ever thought about making a beautiful protective case for your iPad? Share a detailed illustrated tutorial. If you have free time on weekends, you can make one yourself~
Big red, big black, big stripes, it seems a bit earthy (⊙o⊙)...
Template made for ipad mini tablet, width 7.5″, height 9.5″, thickness 0.5″. Tablets of different sizes need to be measured separately.
Template #1: 10″ x 7 1/2″
Template #2: 10″ x 1/2″
Template #3: 10″ x 7 3/4″
Template #4: 10″ x 1/2″
Template #5: 10″ x 3 3/4″
Number the template so that it will not be easily confused later. Please do not use corrugated cardboard, it bends too easily. A slightly harder cardboard should be used.
Cut the fabric to size.
Block #1: 10 1/2″ x 23″
Fabric #2: 10 1/2″ x 15 1/2″
Fabric #3: 10 1/2″ x 8″
Prepare rubber bands, 4" long (4 strips), 11" long (1 strip)
The quality of the rubber band is very important. It must have a certain width and a certain toughness.
Place the rubber bands on the four corners of cloth #3, as shown in the picture.
The rubber band is sewn firmly.
Sewing completed.
Cut off the excess rubber band, being careful not to cut it too close to the sewing line.
Cut the rubber band.
Cloth #2 and Cloth #3 are facing each other and stacked together. One side is sewn and crimped, as shown in the picture.
It looks like it is opened after sewing.
Place the sewn piece of fabric on top of fabric piece #1, aligning the corners.
Measure 2 inches from the seam line and place another 11″ long rubber band and mark it.
Put the long rubber band in place and secure it with beads.
Elastic is a rubber band and open is an opening. Sew with yellow thread for one week.
The effect of turning it out.
The other side effect.
Stuff template #1 into the cloth bag.
It looks stuffed.
Replace template #2.
Then sew and press the seams, and wrap template #2 in fabric. In the same way, add template #3, template #4, and template #5.
The five templates are all placed.
Fold the edge of the fabric inwards.
The selvage edges are sorted.
The mouth is sewn shut using the hidden needle method.
The tablet case is complete.
Putting the tablet on.
The quality of the rubber band is very important. It must have a certain width and elasticity.
The long rubber band is just big enough to hold Template #5 in place.
