DIY cute and fresh bag. The surface of the bag has a strawberry pattern, which looks fresh and feels light. The height of the finished bag is 16 cm and the width is 21.5 cm.
Bag production materials: Strawberry pattern and striped pattern cotton (surface cloth), light-colored cotton cloth (lining), single-sided adhesive resin lining (lining), cotton rope, buttons.
Steps to make a bag:
1) Prepare pattern. Draw the shape and size of the bag you want to make on white paper or scrap newspaper and cut it out with scissors.
2) Cut the table cloth. 2 pieces of strawberry cloth, measuring about 14x 23.5 cm; 2 pieces of striped cloth, measuring about 6x 23.5 cm.
3) Splicing table cloth. Sew the top and bottom of the strawberry cloth and striped cloth together.
4) Cut the lining. Cut 2 pieces of lining according to the paper pattern.
5) Iron the lining. Use an iron to attach the lining to the reverse side of the spliced ??fabric.
6) Cut the lining. Cut 2 pieces of lining fabric according to the paper pattern, leaving a 1cm seam allowance at the edge.
7) Watch pocket stitching. Put the two pieces of watch fabric facing each other, sew three sides, leave the bag mouth unsewed, and sew 4cm long wedge-shaped angles on the left and right sides of the bag bottom to make a watch bag.
8) Making ear hangings. Cut an isosceles trapezoidal strip of fabric with a bottom width of 10cm, a top width of 6cm, and a height of 4cm from the strawberry pattern fabric. Fold the top and bottom sides in half toward the center line of the waist respectively, fold them in half again, and sew them into hanging ears. Sew the hanging ears to the watch pocket. At the center point of the bag mouth, sew a button in a coordinated color at the corresponding position on the other side of the watch bag.
9) Sewing the inner pocket. The two pieces of lining face each other, leave the bag mouth unsewed, sew the two sides and the bottom edge together, and then sew a 4cm long wedge-shaped angle on the left and right sides of the bag bottom. Note that when sewing the bottom, you need to leave 8c in the center of the bottom.The return opening of m will not be sewn for the time being.
10) The inner pocket and the outer pocket are sewn together. Turn the watch bag over to the front, put the watch bag into the inner bag (the front sides of the fabric face each other), and sew the mouth of the watch bag and the inner bag. Note that when sewing the bag mouth, leave about 3cm on the left and right sides without sewing. Then pull out the inner bag from the reserved return opening of the inner bag, stuff the inner bag into the front pocket, and sew the return opening.
11) Making of straps. Cut a rectangular strip of fabric with a width of 4cm from the striped pattern fabric (the length depends on your bag carrying habits), sew the front sides opposite each other, use a return device to turn the strip to the front, and use a belt threader to thread the cotton rope through the strip middle.
12) Sew the lifting strap. Stuff the handle straps into the openings reserved on the left and right sides of the inner pocket and outer pocket, and then sew to close the openings. In this way, the production of a small walking bag is completed.
