DIY-made SLR camera crossbody bag. The camera bag fabric is made of cotton and linen with elegant patterns, and the bag mouth is made of retro square mouth gold kit. The finished camera bag has a simple and beautiful appearance and is easy to open and close. The bag is 16 cm wide, 13 cm high and 8 cm wide. There is also a small pocket sewn inside to hold mobile phones or other small items.
Camera Backpack Materials:
1) Mouth gold kit: square mouth gold 15 cm long and 8 cm wide.
2) Surface cloth A: 1 piece of cotton and linen plaid cloth; Surface cloth B1: 1 piece of cotton and linen patterned cloth; Surface cloth B2: 2 pieces of cotton and linen plaid cloth; Surface cloth C: Cotton and linen plaid cloth.
3) Small pocket cloth: cotton and linen plaid; webbing 13 cm.
4) Lining a: 1 piece of cotton; lining b: 1 piece of cotton; lining c: 1 piece of cotton.
5) 1 shoulder strap and 2 pieces of leather to install the shoulder strap.
6) Cloth lining and cotton spreading.
Camera backpack fabric cutting:
The surface fabric and lining fabric are ironed and lined separately and then cut according to the paper pattern.
How to make a camera backpack:
1) After splicing and sewing the surface fabrics B1 and B2, iron them with single glue and quilting.
2) Fix 2 leather pieces on the table fabric, and use a round chopper to make a round hole in each for mounting the shoulder strap.
3) Sew a decorative webbing under the center line of the front of the small pocket fabric.
4) Fold the small pocket cloth face to face.
5) Sew the edges of the small pocket fabric, leaving 3 to 4 cm for the back opening, and cut off the excess seam allowance.
6) Turn the flap to the front, sew the flap with a hidden stitch, and sew an open stitch on the top of the small pocket.
7) Sew the small pocket fabric onto the lining a.
8) Cut out a small square with a width of 0.7 cm on the left and right sides of the lining a as shown in the picture.
9) After fixing the lining fabrics a and b with a beading needle, sew as shown in the picture, leaving the small square gap unsewed.
10) After fixing the lining a and c with a beading needle, sew as shown.
11) After fixing the lining b and c with a beading needle, sew as shown.
12) Use serrated scissors to cut off the excess seam allowance (or cut the teeth at the curved area), so that the inner bag is completed.
13) Sew the watch pocket using the same method as the inner pocket.
14) Put the inner bag into the outer bag, fix it with a beading needle and sew, leaving 7 to 8 cm for the return opening, and trim the seam allowance to 0.2 to 0.3 cm.
15) Turn the bag body to the front from the return opening, and then sew the return opening with a hidden stitch. Iron the bag body and sew the topstitch 0.2 to 0.3 cm away from the bag mouth. The thread indicated by the arrow in the picture must be broken before sewing.
16) Install the mouth gold, install the cross-body strap, and complete the production of the camera backpack.