This is a thread embroidery backstitch embroidery method. The picture above is the finished result.
The effect of this embroidery method is a bit like a wave, and it is also a lace embroidery mode.
Figure 1: Use another thread and needle to pass upward from A, and pass through the A and B sections of the backstitch embroidery, as shown in the picture. Be careful not to pull the fabric under the embroidery section.
Picture 2: Next, as shown in the picture, pass the needle through the BC section of the back stitch. Likewise, don't embroider into the fabric underneath the embroidery section.
Figure 3: Repeat this step and carefully pass the thread through each section of the back stitch.
Figure 4: The completed rendering is as follows.
Note:
Make sure that every time the needle passes through the backstitch embroidery section, it does not pull the fabric underneath. It is recommended to use a blunt needle for embroidery.
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? Be careful not to embroider the embroidery section too tight with the previous backstitch method, so that the other thread can pass through easily.
