< /p>
Chinese bamboo weaving has a long history. From the Warring States Period 2,000 years ago to modern civilized society, bamboo tools, bamboo building materials, bamboo daily necessities, and bamboo artworks have always been indispensable companions in Chinese peoples lives. Meat to eat, bamboo to live in, bamboo chairs to sit on, and bamboo arts to enjoy are the ideals of the ancient Chinese.
One ??of the bamboo weaving techniques. The warp and weft strips of the same width and thickness are alternately pierced and pressed into a square hollow pattern, and then the warp and weft strips are pierced and pressed diagonally at the four corners of the hollow pattern to form an octagonal hollow pattern. For example, the inner layer of the square bamboo basket unearthed from Tomb No. 1 in Wangshan, Jiangling, Hubei Province, has a pattern woven using this method.
The editor has collected this simple and easy-to-follow bamboo weaving tutorial for everyone to try and experience the charm of bamboo weaving in your free time~
1. Arrange twelve green bamboo shoots side by side, and place a handle of green bamboo in the middle, as shown in Figure 1.
< /p>
Figure 1
2. Weave the yellow weft material in the middle using a two-for-two method, as shown in Figure 2.
< /p>
Figure 2
3. Take the yellow weft material numbered 0 in the middle as the center, and add seven red weft materials above and below, as shown in Figures 3, 4, and 5.
< /p>
Figure 3
< /p>
Figure 4
< /p>
Figure 5
4. After the fifteen red bamboo strips are braided, nine yellow bamboo strips are braided on top and bottom, as shown in Figures 6, 7, and 8.
< /p>
Figure 6
< /p>
Figure 7
Figure 8
5. As shown in Figure 9, fold the upper and lower weft materials into warp materials at 45 degrees and braid them in; as shown in Figure A and D, the bamboo strips will overlap in the middle.
< /p>
Figure 9
6. Insert in sequence until there are thirteen weft pieces left. (Figure 10)
< /p>
Figure 10
7. The left side is completed (Figure 11).
< /p>
Figure 11
8. Both left and right sides are completed (Picture 12).
< /p>
Figure 12
9. Weave the remaining materials from the top, bottom, left and right into the fan body forward or backward.
10,
< /p>
Figure 13
11. Complete
< /p>
Figure 14
