Illustrated tutorial on making your own woven flower baskets and garbage baskets using packing tape

Today I will share with you an illustrated tutorial on how to make a homemade basket for packing. I hope you like it.
1. Cut the woven tape into 4 pieces of the same length (the length depends on the size of the flower basket you want to make, length = bottom diameter + 2 height + 10cm). Mine are 45cm long. Braid it in the middle as shown in the picture and tie it with a string to facilitate fixation
2. Cut the strap into two parts

3. Use a tape cut to 1/4 width to braid one circle up and down (the bottom side can be braided evenly with a thin tape)
4. Use another piece of tape to make a second loop, in the opposite direction to the first loop.

5. Knit the third circle while tightening it, so that the front one can be fixed
6. The fourth circle, the fifth circle...knit it in this order, and try to Adjust the blue color evenly

7. Cut off the excess strap until it is the size you want
8. Fold the blue strap like this

9. Use a tape cut into 1/2 width to braid the side, and cut the beginning into a bevel, try to connect it with the bottom as much as possible
10. It is best to line the middle with a flower pot of appropriate size, so compare Easy to controlshape