Halloween is one of the most fun holidays of the year, and you can make some of your own creations with materials you already have at home. I made a Halloween witch house, which turned out to be a pretty nice Halloween decoration when lit up!~
The following is a list of required materials:
Plastic bottle (I used a 1.25 liter Sprite bottle), aluminum foil, cutters, scissors, pliers, 10-inch string, glue gun, glue, tissue paper, ruler, pencil, paint, brush, water, lamp, Orange glitter.
Start peeling the label off the bottle.
Then cut out the top with a knife and set aside.
Same way and cut off the bottom of the bottle (about 2.5 inches).
Now the middle part of the bottle is left, cut it open.
The top of the bottle will become the witchs roof, the middle will be the bottom of the house, and the bottom will be used to make pumpkins!
Use a glue gun to glue the openings in the middle of the bottle together to form a tapered cylinder that is wide at the top and narrow at the bottom.
Coat the wider edge of the tapered cylinder with hot glue.
Now glue the top of the bottle to it, this will form the roof.
Apply glue to the sides of the conical cylinder and glue the bottom to form a pumpkin.
Tape aluminum foil around the bottom and top roof joints.
Insert a piece of wire into the bottle cap, then bend the wire to create a slight arch and a small hook at the top of the wire.
On the roofOn the same side of the section, bend the wire by gently piercing it into the bottle and gluing it to hold it in place.
Wrap and adhere pieces of aluminum foil to form the shape of the roof.
And add some twists of foil on top of the pumpkin to resemble a stem.
Make small windows and doors out of aluminum foil and glue the windows to the roof.
Adhere the door to the bottom position.
Mix some water-soluble glue and water, apply it to the model with a brush, and stick the tissue paper until it is completely covered.
Once completely dry, cut out the eyes and mouth of the pumpkin.
You can cut a small moon shape out of the door.
Apply paint and optionally sprinkle on a little glitter after painting.
Finally put in the lamps and the beautiful Halloween witch house is ready~
