Novel and interesting Halloween bat projection, projecting bats on the roof or wall, or even other Halloween monster elements you like! Are you guys a little excited? This idea can also be used in other holiday decorations. If you are interested in this, just follow the illustration below!~
Materials and tools: cardboard, wire, bamboo sticks, pencils, white paper, hot glue gun, and jack-o-lantern.
1. First cut two wires of the same length.
2. Place them crosswise and twist them together, and apply hot melt glue at the middle point.
3. Draw a bat template on white paper, and then cut out a black cardboard bat.
4. Use hot melt glue to stick the bat to the end of the wire.
5. Take another piece of wire and twist it into a ring shape on the cylindrical prop.
6. When finished, as shown in the picture, one of the ends should stand up.
7. Glue the completed structure to the middle of the wire.
8. Hold the erected wire to rotate the prop.
9. Adjust the curvature of the wire.
10. Also draw a ghost on the white paper and cut it out.
11. Fix the ghost to the middle position.
12. Remove the part indicated by the arrow from the beverage bottle cap.
13. What it looks like after being removed.
14. Paste it to one end of the bamboo stick.
15. Insert the bamboo skewer into the jack-o'-lantern, and then insert the erected wire into the plastic structure and its done~
