Handmade tutorial for DIY lace candle cup. It is not a real candle cup. Do not put candles in it, as it may ignite the decorative paper~
Main materials:
4 pieces of colored paper/4 glasses
Crystal beads 1 bag/candlestick 4 small lamps
Tools required:
1 pair of scissors/1 sponge brush
1 marker/1 ruler
Production steps:
Step 1:
These are the materials~
Step 2:
According to the height of the glass, mark the appropriate position with a marker as shown in the picture.
Step 3:
Use a ruler to install carefullyDraw a straight line on the decorative paper, as shown in the picture.
Step 4:
After cutting the long strip of decorative paper according to the marks of the marker, then cut the strip into small pieces about 3cm wide, as shown in the picture.
Step 5:
As shown in the picture, squeeze out some white latex and set aside.
Step 6:
Use a sponge brush to dip an appropriate amount of white latex, as shown in the picture, and apply it evenly to the front of the decorative paper.
Step 7:
Follow the above method and glue the cut 3cm wide pieces of paper to the inner wall of the glass. The effect is as shown below.
Step 8:
You can make a few more using the same method~Choose glasses of different heights and decorative paper with different patterns, the effect will be great~
Step 9:
Put the crystal gravel into the cup, approximately to the position indicated by the finger in the picture.
Step 10:
After installing the crystal gravel, place the small candle light into the glass as shown in the picture.
Step 11:
As shown in the picture, you can decorate the outside of the glass with a black ribbon bow.
Step 12:
Finally, turn on all the lights. The effect is as shown in the picture. It’s done~it’s great~
