Share a DIY tutorial for a purely hand-carved wood incense burner. This is my first time making a small incense burner. Quite satisfactory. First, make a cube, determine the position of the bottom and the center line of the side, and then draw the picture. Because as a girl, my hands are not as strong as those of men, and the material is relatively soft, otherwise I would dig it to death. Whenever digging cannot be done, use borrowed strength and push the handle of the knife with your shoulder. Men do have an advantage in this regard. The distance and specifications depend on the size. I use 5 mm as the basis. The upper edge is 4 mm, leaving room for polishing. You can see the rest by yourself.
Tools and materials required for handmade incense burner carving:
Wood, various files, scroll saws, pens, rulers, sandpaper, wood carving knives,
Illustration of the steps for carving handmade incense burners:
Step 1 of handmade incense burner carving:
Draw wood in a straight line to determine the square shape
Handmade incense burner carving step 2:
4.9cm
Step 3 of handmade incense burner carving:
Determine the bottom
Step 4 of handmade incense burner carving:
Determined edge
Step 5 of handmade incense burner carving:
Draw the size of the incense insert in the middle
Step 6 of handmade incense burner carving:
Shovel off the excess
Step 7 of handmade incense burner carving:
Use a jigsaw to cut out the corners
Step 8 of handmade incense burner carving:
Corner position
Step 9 of handmade incense burner carving:
Large completion
Step 10 of handmade incense burner carving:
Polish
Step 11 of handmade incense burner carving:
After a rough grinding, the effect is good. I'll just find a section of the middle copper pipe and insert it into it in a few days.
