You can carve a flowerpot with ordinary stone~ Tools and materials needed for natural stone flowerpot carving:
An appropriate amount of natural stone, a bench drill or electric drill, one or more emery barrel drills, a small hammer, water,
Illustration of steps for carving natural stone flower pots:
Natural stone flowerpot carving step 1:
I picked up some stones by the river last year, and this is one of them
Natural stone flowerpot carving step 2:
In order to reduce noise and vibration, I put two pieces of foam flooring
Natural stone flowerpot carving step 3:
This is an emery drill bit, good for drilling glass, stone, and wood
Natural stone flowerpot carving step 4:
When drilling, be sure to water while drilling to reduce dust and extend the service life of the drill bit
Natural stone flowerpot carving step 5:
The stone must be fixed, otherwise it may be dangerous
Natural stone flowerpot carving step 6:
You can use the same drill bit to change the position, or you can change the size of the drill and make the middle stone smaller
Natural stone flowerpot carving step 7:
After drilling the middle part smaller, use a small hammer to gently knock it off. Don't use too much force, otherwise the outside may be broken. Then polish it again. Completed
Natural stone flowerpot carving step 8:
I didn’t buy a bench drill when I did it last year, so I just used it. It was not easy to control and the noise was very loud
