Fans at home are very convenient to use in summer, but one problem is that fans tend to accumulate dust, so fan covers are very necessary. The production department will now teach you how to make a fan dust cover by hand. Follow the DIY steps of this fan dust cover and learn together!
How to make a small fresh fabric fan cover with English rose and lace. No matter how the wind blows, the fan cover will not blow away, protecting the fan from dust.
How to make a fabric fan cover:
Step one: Use a soft ruler to measure the diameter of the fan. When measuring, remember to measure from edge to edge. It doesn't matter if the quantity is large, you can still modify it, but if the quantity is small, there is nothing you can do, so I suggest you pick the edge to edge that can produce the largest diameter.
Step 2: Fold the prepared sandwich cotton fabric in half horizontally and then vertically, and fold it into a quarter of the original area. Divide the diameter measured in the first step by 2 to get the radius, and cut based on this radius. Sandwich the cotton fabric into a round shape and prepare two pieces of such fabric. Then use half that radius as a radius and cut a round piece of English rose rag.
Step 3: Align the rose fabric and a piece of sandwich cotton with the center of the circle. Use a pin to fix the rose fabric to the sandwich cotton. Use a sewing machine to sew a circle to fix it. Then use lace longer than the perimeter of the rose fabric to sew to its periphery. It is more full of fantasy and palace.
Step 4: Prepare a piece of circular cotton cloth with a radius that is twice the radius of the fan. Cut out concentric cotton cloth and a ring-shaped cloth at the same center and the radius of the fan. After the two pieces of sandwich cotton fabric are aligned and sewn back to back, turn it over so that the rose side fabric is facing up, take out the inner circumference of the ring fabric and sew them in alignment with the circumference of the large fabric.
Step 5: Fold the outer circumference of the ordinary cotton fabric inward 3cm and sew, leaving a small opening unsewed. Prepare a pin and a rubber band that is half the circumference of the fan. Use the pin to buckle one side of the rubber band, insert it through the small opening, and tuck the rubber band to the edge of the ordinary cotton cloth.
Step 6: Finally tie the rubber band with a double knot. Look at the picture on the back. Use rubber bands to create elastic openings that make it easier to put the fan cover on and secure it well after putting it on. www.diyju.com
Just like this, you have finished making a fan dust cover by hand. This DIY method can also make rectangular protective covers for electrical appliances at home.
Extended reading:
1. Homemade white cotton mask hand-making tutorial
2. A good place to store needlework and thread. Handmade diy creative needlework storage
3. Turn disposable paper cups into treasures and DIY small fabric flower pots
4. Fabric handmade baby shoes tutorial teaches you how to make baby toddler shoes
5. How to make your own fabric cushions. Handmade DIY cushion illustrated tutorial
