How to make an easy-to-wear suit and tie by hand

When wearing a formal suit, tie it with a beautiful tie, which is both beautiful and elegant, and gives people a formal and solemn feeling. However, ties are not only worn by adults in our daily lives, but also as standard for childrens mens school uniforms. Tie tying methods are complex and diverse. Below, the editor has compiled a tutorial for you to make a handmade suit tie that is easy to wear. The improved tie can be easily worn by men or children who are self-sufficient. They no longer need to worry about wearing a tie. You need to make an opening at the neck of the tie and sew the Velcro. Let’s learn together.

How to make a suit and tie by hand

Steps to tie a tie

With the back of the tie sideways (large strap on the left, small strap on the right), fold the large strap sideways toward you (white line). Next, on the right side (red line).
Collapse as shown below.
The small band edge is also folded in front (white line) and left (red line).
Collapse. Pay attention to the location of the yellow star.
Push into pockets made from large strap sides.
Gently secure the roots with a rubber band.
Look at the length of the large band (yellow line) based on the model. And mark its length (red line).

Adjust the length of the tie

Remove the small strap (tag) attached to the back.
From the marks attached in step "7", take the seam allowance and cut to length. After sewing, allow enough time to adjust the seam allowance width.
Spread the center seam on the back to about 2 to 3 times the width.
Cut the core material to final length.
Tie the tie in the "half front" half. At this point, it becomes centered by matching the pleats and markings of the tie.
With sewingThe machine cuts the 90-degree line at the crease. At least on the fold, you can sew some more if you can.
Leave a seam thickness of about 7 mm and cut off the excess.
Turn to "Front".
The center (yellow thread) is sewn by hand.
Correct the length of the large belt. Likewise, we will also do steps "9" to "16" in the zonule.
I will sew a small cord (tag) by hand.

Make Magic Paste

Use the excess fabric to make a Velcro.
Fold the ends by the seam width, folding them to the "inside front"Half of the "part". And sew with a width of about 2 cm.
Cut extra seam allowance width.
Pull it through the knot of the tie. If its difficult to get through, loosen the rubber band slightly.
Place it in the middle of the strap.
Cross to the other side.
Through the loop.
Remove the rubber band, tighten the knot, then shape it and sew with strong thread.
Sew Velcro on the tail and the tie is completed.