Small square fabric sponge cushion handmade tutorial

In autumn and winter, cushions are an indispensable part of the office. Today I would like to share with you a tutorial on how to make a very practical cushion by hand, which can often be used in daily life. In winter, instead of sitting directly on a chair, wouldn’t it be more comfortable to add a cushion to the chair? In terms of production, the main process is actually to use a sponge as the main body, fill it with cotton padding in the middle, and use some scrap fabric that is not usually used. Everyone, hurry up and give it a try.

Handmade sponge cushion tutorial

Cut the sponge to the specified size.
Prepare the fabric and cut the fabric to the corresponding size.
Cut the fabric as shown below.
Sew with a sewing machine.
Place the sponge on the front of the fabric, covering the bottom.
Fold and wrap the sponge.
Secure with pin to allow for suturing.
Take out the sponge pad.
Next, place the sponge in the center of the fabric and mark the ends of the sponge.
Use a sewing machine to sew both ends (yellow line).
Fill the sponge with fabric, the effect is as shown in the picture below.
Arrange the sponge at the overlapping entrance of the fabric. If the fabric is dirty, it can be removed and cleaned.
Turn the fabric inside out and make the corners.
Pinch the extra part of the corner into a triangle and draw a line.
Tear apart the corners, and then secure a rubber band to the upper corner.
Cut the corners slightly larger than the width of the rubber band (2cm wide) (repeat on both sides).
Sew the rubber bands at the corners.
Cut off the extra rubber band and turn it back over.
Done! The small square sponge cushions are handmade.