DIY insulated water cup cover graphic tutorial, how to make a good-looking cup cover for a water cup

Add a coat to your water bottle to keep it warm and insulated! Lets follow the production department editor to learn the graphic tutorial of DIY insulated water cup cover, and teach you how to make a good-looking cup cover for the water cup!

DIY insulated water cup cover graphic tutorial, how to make a good-looking cup cover for a water cup < /p>

Picture and text tutorial:

1. How to intercept fabric

Use a ruler to measure the circumference of the water glass. (Half the circumference) + 3 = wide width of the fabric.
For example, if the circumference is 21.5 cm, the fabric surface becomes 13.8 cm.
Measure the diameter.
Measure height.
Cut the fabric to the above dimensions and trim.

2. How to sew

When finished, you will have a bottom like this.
As shown in the picture, the front of the finished product.
Fold the fabric in half. Sew with a seam allowance of 1 cm on both sides. (red line)
Fold the bottom (the height is half the diameter) and sew. (white line)
Turn the sleeve over and check the size, try it on with a cup.
Sew both sides (yellow thread). (If it shrinks 2 mm inward, the circumference of the cup sleeve will shrink 4 mm)
Check the dimensions again.
Cut off the corners (red lines).
Seam and lining both ends (yellow line).
Determine the height of the cup sleeve mouth.
The cuff is folded inward and sutured.
As shown in the picture.
The cup sleeve part is completed.

3. Add a shoulder strap to the water cup

Prepare a shoulder strap 110~130cm long (divided into 12cm short tape and the remaining long tape),
Both sides of the shoulder strap are clipped to both sides of the cup holder.
Tie the shoulder straps with rubber bands.
Put the shoulder strap tied with a rubber band inside the cup holder.
Sew about 3 cm from the bag opening (yellow line). Same on both sides
As shown in the picture.
Make sure both ends are on the same level.
The shoulder strap is finished.
9. It’s OK Hang small trinkets from the shoulder straps. Have you learned the graphic tutorial of DIY insulated water cup cover? Make a nice-looking and heat-insulating sleeve for your water cup!