Today I will share with you a simple
red rope bracelet weaving method illustrated tutorial with relatively simple steps. But it’s also very delicate and beautiful~
Tools and materials needed:
Thread, beads, lighter, scissors
Illustrated steps
First, prepare the tools and materials we will use to weave the bracelet , five red threads, and some beads. . It is best to choose red beads for good wiring. Then you need to prepare scissors and a lighter. The thread I chose is 0.08mm in diameter. After preparation, lets start weaving the handmade bracelet. First, align the four equal-length red ropes and tie the four together into a knot. Be careful not to tie them too tightly. Then place the red rope flat on the table, as shown in Figure 2
Next, , just pick the edge of the red thread as the axis. The axis is immovable, and then use the other three red threads to make a diagonal knot with the axis. The diagonal knot is very commonly used for braiding bracelets, especially wide bracelets. A kind of knot. Lets learn it together and it is very helpful for braiding bracelets. The braiding method is very simple. Here are the front and back pictures after braiding.
After completing the second step, take the line in the direction of the arrow on the right as the axis, as shown in Figure 1. The axis is stationary, and then braid the other three red lines into a diagonal knot with the axis, as shown in Figure 1. As shown in Figure 2, this is the oblique curly knot after braiding. Then thread the second thread from the right through the bead. As shown in Figure 3
After completing the previous step, take the line in the direction of the arrow on the left as the axis, as shown in Figure 1. The axis is stationary, and then braid the other three red lines into a diagonal knot with the axis, as shown in Figure 2. Show, this is the oblique curly knot after braiding.
Take the line in the direction of the arrow on the left as the axis, as shown in Figure 1, and then braid the other three red threads with the axis as a skew knot, as shown in Figure 2. This is the finished skew knot. Then thread the second thread from the left through the bead. As shown in Figure 3
I believe everyone has an idea of ??the next steps. Take the line in the direction of the arrow on the right as the axis, as shown in Figure 1, and then braid the other three red threads with the axis as a diagonal roll knot, as shown in Figure 2. This is the finished diagonal roll knot.
Repeat steps 2.3.4.5.6., braid oblique curly knots, string beads, then the left side, then the right side, and you will get the bracelet as shown in the picture. You can stop until the appropriate length is reached. Got it
After editing, it’s the end. Prepare another wire first. Then arrange all the threads at both ends of the braided bracelet and put them together, as shown in Figure 2. Put the threads at one end to one side and the other end to the other side. Keep it as separate as possible. After straightening it out, fold the other thread in half, and use the eight threads of the bracelet as the axis to make a flat knot. . The flat knot is movable. After braiding, cut off the excess.
As for the remaining thread at the end, you have two ways to choose. One is to thread beads and string beads on the tail thread. The second is to braid, and make a figure eight knot. Also known as the Phoenix Tail Knot. The method of braiding the Eight-Character Knot is actually very simple and you can learn it once you learn it. As for the braiding method, I won’t go into details. If you have relevant experience, you can learn it if you are interested.
Finished picture, END
Tips:
Be careful not to make mistakes in the lines
