This is< a href="https://www.111diy.com/" target="_blank" class="infotextkey">Handmade moving castle. The main material is balsa wood cut by myself. Before DIY Prepare all the required materials: 1. Balsa wood chips. It has a soft texture, light weight, average strength, and should be easy to cut and trim. (As shown in the picture above) 2. UHU glue. Glued wood products work well, you’ll know it once you’ve used it. 3. Plastic pigments. Produced by TUMA, it is expensive but very easy to use, and acrylic paints can also be used. 4. Utility knife, ruler, compass and other tools.
The first step is to hand-make the face and build the overall frame.
Complete it according to the expected arc, and then add the nose and eyes
Looking from the back, it is a dense patchwork of adhesive patches. The curved surface can only be repaired using this cumbersome method. A load-bearing rod is installed in the middle part to connect it. adjacent parts.
Then the lower forehead and the ground. The production method is similar, and a load-bearing pole needs to be left to connect to the upper part.
Connect the two parts of the face through the middle rod, and add Upper surface, floor and tongue. The main model has been produced and it finally looks decent (the teeth are too big and will need to be redone later).
Complete the wood pieces around the main body, and use landscaping mud to repair gaps and unsatisfactory details.
p>
On the main body The aging effect. However, the effect was not good and failed, so it was repainted again.
This is the effect after repainting. Copper-colored paint is used to decorate the corners to highlight the effect. The feet are made of Gundam The models bracket is mixed with wood chips and painted with metallic gold.
Start making a house. Making a house is relatively simple. You just need to make the basic structure, paint, stick wood pieces, and put on tiles. Just like the details.
The same is true for other structures. Make the structure first and then paint it.
When building the house structure, you should try it out first. If you are not satisfied, correct it in time before painting.
Approximately This is it. Please ignore the pink roof. The color is too bright and will be repainted later.
The chimney is made of cylinders of different diameters stacked on top of each other. In order to make it simple, I used a cylinder foam support here. The surface Just attach the wood pieces directly. Here we will modify the shape of the lower jaw.
The production of windows is very meticulous. One mm thick wood slices are cut into strips, held up with tweezers, glued with 502, and then a layer of transparent plastic is added after coloring. I won’t go into details about the film and other details.
Finally, the castle was born on the messy table. Although the production process was cumbersome, with various reworks and various entanglements, the work was completed as envisioned. At that moment, everything All efforts are valuable.
