In order to avoid burns on the table, we often put hot cups on coasters. There are few styles of coasters in shopping malls. Today I will give you a tip. Use old CDs and rags to make simple coasters by hand. Although It’s simple but the coasters you make are exquisite! Let’s follow the DIY CD coaster tutorial and learn how to make simple coasters by hand using waste CDs!
< /p>
DIY disc coaster material
Two CDs, fabric of your choice, cotton without glue, ordinary double-sided tape, and needlework and scissors.
< /p>
Steps to make simple coasters from waste CDs
< /p>
Step one: Cut the fabric into a circle. The fabric is larger than the disc, about 3 cm wide.
< /p>
Step 2: Paste double-sided tape on the back of the disc, which is the side where the pattern is printed, to fix the auxiliary cotton.
< /p>
< /p>
Step 3: Tear off the white paper of the double-sided tape, stick the auxiliary cotton on it, and then cut the auxiliary cotton until the auxiliary cotton is the same size as the CD.
Step 4: Thread the needle and thread, and start sewing about half a centimeter inward from the edge of the fabric. You can control the stitching distance yourself. A stitching distance of 0.5cm to 1cm is better. After sewing for one week, put the side with the auxiliary cotton on the disc facing the back of the fabric. Place it in the center, start pulling out the thread, and tighten it.
< /p>
Step 5: Sew the fabric label.
< /p>
Step 6: In the same way, repeat steps one to four to make the other half of the simple coaster made from waste CDs. Finally, put the two together to make a simple coaster made by hand from waste CDs. finished.
CD Coaster Coaster
Illustrated tutorial on hand-making exquisite lace water coasters and pot insulation mats from old CDs
