The production department will share with you a small production of cans that turn money into treasure. You only need an empty can and a few simple steps to make an alcohol stove. Doesn't it sound cool? This can-made alcohol stove has very good combustion performance and is very refined. Come and learn!
Illustrated tutorial on making homemade alcohol stove from cans
Illustrated tutorial on homemade alcohol stove from cans:
Tools/Materials for homemade alcohol stove from cans: one can, alcohol, ruler, fireproof tape, pin, can knife, stapler, needle-nose pliers, scissors, oil-based pen
Cut the can into 3 parts, as shown in the picture above, we label them as (A), (B), and (C) respectively
Parts (A) and (B) are cut to the same height of about 4 cm, and the height of part (C) is about 3 cm (you can use a ruler to divide it into sections in advance before cutting)
Note: Part B is cut
Put (B) into the narrowest part of the top of (A) and adjust it to the appropriate size;
Then keep the size of the circle unchanged, take it out and staple it into a cylinder with a stapler
Use scissors to cut the lower circle of (B) every 1CM to a depth of about 5mm;
After cutting, use needle-nose pliers to slightly bend the cut part inward;
Okay, completed and ready for use
Since we need to put (A) on the bottom (C), we need to use needle-nose pliers to make the (C) part slightly smaller (as shown in the picture above);
Note that when adjusting, leave 1 cm at the bottom unadjusted to prevent alcohol leakage.
Drill fire holes every 1 cm in part (A). You can use a graph paper to mark the intervals so that the drilled holes will be more even;
Tip: This step of drilling can be done in step 1 (that is, drill the fire hole before cutting the can into 3 parts)
Put (B) inside (C), then cover (A);
Then push down with your hands from above, making sure to push vertically up and down without any deviation;
Ensure that the middle bottom is pushed to the bottom as far as possible without bending
Seal the bottom interfaces of (A) and (C) with fireproof tape
Okay, our small production of cans and the illustrated tutorial on homemade alcohol stove for cans are complete here!
How to use a homemade alcohol stove: Pour about 20 ml of alcohol and light it immediately!
Tips for preventing burns in the production department: 1. Try to stay away from the alcohol stove when it is lit; 2. Used alcohol stovesNever take it with your hands; 3. Don’t pour too much alcohol to prevent it from overflowing.
Homemade alcohol stove
Tutorial on hand-made alcohol stove from cans, 7 steps to turn money into treasure
Tutorial on how to make an alcohol stove from cans. Teach you how to make an alcohol stove from cans
Diy alcohol stove for cans and homemade alcohol lamp for cans with graphic tutorial
DIY outdoor portable alcohol stove: How to make handmade alcohol stove from cans
How to make your own alcohol stove? Teach you how to make a simple solid alcohol stove using cans
