Tutorial on making your own Gatling gun model toy
People usually feel that PVC pipes and PVC boards are not very useful, but in fact, these two materials can be used to make Gatling, but they cannot fire bullets. A very handsome toy.
You can find some photos online, it looks like this.
You can find ready-made demonstration videos online, and impatient friends can watch them first.
First prepare some materials, several PVC pipes with certain diameters, and each one The length is also the same.
Two PVC boards. The sizes of these two boards are different. You can buy them at hardware stores or online.
In addition to preparing materials, you also need to prepare some tools, including pencils, rulers, compasses and utility knives.
First use a utility knife to cut them out. The length of the six small circular cuts should not be too long, otherwise they will become loose. You can use sandpaper or a file to smooth them.
That’s it, you can play with the details yourself.
Two beer cans, use iron pliers to get them out.
Can be used to hide batteries.
It is recommended to find someone to help you when rolling up the spool and fixing the motor. So sticky.
For the internal fixing part, other methods can be used, but the one I made is not very strong. In addition, bearings cost 5 yuan.
Burned with fire.
The cylinder is for the motor.
Install the motor.
No soldering iron, just pass it through.
Making the rear handle.< /p>
Add a bearing, otherwise Will get stuck.
