Tutorial on how to make cool disk cover coils as a New Year gift
Having a boyfriend who is a science student should be very interesting, especially for boys who are technical nerds. They can find breakthroughs in various difficulties, so when preparing New Year gifts for boys who are technical nerds, you can invest in them. So, let’s DIY some New Year gifts that look very scientific, like the coil book here made of magnetic disks. Isn’t it very cool?
Main material: Disk, coil book, Tools required: Utility knife, electric drill, pliers, Production steps:
Step 1: The disks here also have a sense of age. Will the coil book made in this way feel a bit retro
Step 2: Remove the metal spiral ring from the coil book
Step 3: Put the paper aside neatly without disturbing it, and take out the first one
Step 4: Mark the disk according to the holes next to the paper
Step 5: Next, you need to use an electric drill to open up the marked position
Step 6: That’s it
Step 7: Because the book has two covers, we need to use a utility knife to separate the disk
Step 8: Take it apart in this way, and the middle parts can be glued to the shell by hand to maintain integrity
Step 9: Cut the paper according to the size of the disk
Step 10: Then clamp the paper up and down with the two disk shells. Next, you need to slowly screw the metal spiral ring into the hole from below
Step 11: Screw the entire spiral ring onto the notebook
Step 12: Use pliers to break off the pointed end to a horizontal position
Step 13: This way the spiral ring will not come out with use and will not scratch your fingers
Step 14: In this way, the cool disk notebook is ready!
