The transformation of old objects is actually a test of our manual skills. Why do we say this? After all, some waste itself has no use. If we don’t think of some ways to reuse it, it may never have the opportunity to become a part of our daily life. Today we learned this craft of renovating old objects. The illustrated tutorial teaches you how to turn a discarded plate into a treasure and transform it into a very beautiful clock. What is the effect of combining plates and clocks? I believe you have seen from someone’s real-life pictures that after transforming the plate and clock together, the artistic effect is very strong when hung on the wall.
Step 1:
Find a more elegant plate to use
Step 2:
< img alt="Renovation of old objects and handmade IKEA style clocks teaches you how to beautify your home" src="https://img.111diy.com/timthumb.php?src=/d/file/20220222/0sbgo5qxpm3.jpg" />
Drill a hole at the center point, you need a drill bit for drilling tiles
Step 3:
The hole is drilled and the plate is not cracked
Step 4:
This is the movement of the clock
Step 5:
Just install it, is it very simple?
Step 6:
It looks very IKEA style when hung on the wall
Step 7:
If you want to continue adding numbers above, then continue to watch the tutorial
Step 8:
Draw the dividing line
Step 9:
Use hollowed-out digital pieces to draw Good Numbers
Step 10:
You can drill a few small holes to facilitate marking on the clock
Step 11:
< p>After the drawing is done, if you are confident, you can draw it directly on the clock face without using a templateStep 12:
You can start carving
Step 13:
The numbers are engraved
Step 14:
If you don’t want to engrave, you can use paint to directly draw the numbers
Step 15:
How about it, it’s easier to tell the time
Step 16:
It will look just as good hanging on the wall!
Step 17:
p>< /p>
This production process is relatively complicated. Why is it so complicated to make such a plate clock? Mainly because the plate itself is relatively hard, and we may need to use it when making it. Electric drill. After using the electric drill to drill holes, you can insert the movement structure of the watch into it, and you are done.This plate clock was made.