DIY tutorial for using waste incandescent light bulbs to make a boat inside a light bulb
It is difficult to buy this kind of incandescent light bulb now. It was still the most commonly used light bulb when I was a child, so I am still very emotional when I see this kind of light bulb. The shape of this kind of incandescent light bulb itself is very artistic. We The tutorial here is to put a boat inside a light bulb to make a beautiful handcraft. If you don’t have a Christmas gift in mind at Christmas, just make a boat inside this light bulb.
Main material: Incandescent light bulbs, cork, wire, toothpicks, Tools required: Hot melt glue, hammer, pliers, etc., Production steps:
Step 1: The first thing we have to do is to separate the glass in front of the bulb from the lamp holder at the back, slowly pry open the fixed position, and then remove the front part
Step 2: This will expose the filament inside
Step 3: Wrap the front filament with cloth
Step 4: Break it slowly and clean up the broken glass
Step 5: Thread the thin wire into one end of the toothpick
Step 6: Then bend it with pliers
Step 7: Bend both sides
Step 8: That’s it
Step 9: Carve the cork into the shape of this hull, and then fix the mast made previously to it
Step 10: Use wire to secure
Step 11: This ensures that the toothpick can be tipped down smoothly
Step 12: Then stand up again
Step 13: Also add a toothpick to the front of the boat
Step 14: Add lines and sails
Step 15: Decorate it with watercolor pens, and the boat is ready
