How to make your own simple air purifier

Except for some remote places, most places are seriously polluted.

What I share with you here is a tutorial on how to make an air purifier for home use.

If you are pursuing individuality, you can do it yourself.

First prepare some materials, drill two small holes on the PVC pipe, and then pass the wires of the adapter part and the wires of the fan.

Make the hole as close to the top as possible so that there is enough space to install the fan.

Then drill a larger hole before the two holes, mainly used to turn on the switch.

Twist the wire connector and adapter together.

Then solder the negative electrode, and then solder the positive wire to the plug that turns on the switch.noodle.

Pay attention to folding the filter into a square, it is relatively thick.

Place it on top of the side opposite to the fan and secure it with the hose clamp.

After tightening, cut off the corners of the excess filter parts.

After plugging in the power, everyone will find that a simple air purifier starts to operate normally.

It is recommended that you replace the filter element every month.