Tutorial on making a paper iPhone holder purely by hand [with drawings]

Tutorial on making a paper iPhone holder purely by hand [with drawings]

This is a handmade paper craft that is full of fun and environmental protection. The simple and environmentally friendly design makes the simple lines of the iPhone unreservedly displayed in front of people. Faced with such an ingenious iPhone holder, if you like DIY, why don’t you hold on? Why don’t you quickly download the drawings, print them and make them, letting others know that your attitude towards the environment is always friendly!

---

Basic production process of iphone holder

First, right-click the last drawing in this tutorial - Save As to get a larger picture. Then print the drawing onto A4 size cardboard. The recommended weight of the paper is 220-270 g/m. If the weight of the paper is too light, it may not be able to bear the load properly.

Use the back of a utility knife to pre-fold the dotted line in the model drawing, that is, the blunter side.

Then cut out the iPhone holder model from the paper and carve it out with a utility knife.

Fold the right part of the drawing down and insert it into the round hole in the middle.

Then insert the structures on the left side of the origami drawing into the notches on the right side.

Gently press down the structure inserted in the previous step, and the entire iPhone holder is completed.

---

↓For the drawings needed for this production, right-click - Save As to download the large image↓