If you want to dress yourself beautifully, it is always right to prepare various accessories.
But there are also worries about this. How can I show these beautiful jewelry intuitively in front of me and still choose it by myself?
In this tutorial, I'll show you how to turn an old tray into a beautiful and functional jewelry display stand. Place earrings, rings, necklaces, bracelets, etc. into categories, and you will never choose the wrong accessories that are most suitable for that day!~
You need to prepare:
Old pallets
Ring screws
Hook screws
Long wooden bar
Wood Glue
Brush
Masking tape
Clip
Electric drill
Paint
Saw
Sandpaper
Tape measure
These two screws are installed inside and at the bottom of the tray, and have different functions.
1. First, saw the wooden strips to the same length as the pallet, and use sandpaper to polish the saw surface to make it smooth.
2. Then apply wood glue to the wooden strips. If the texture of the two sides of the wood strip is different, you can choose and apply glue on the side you don't like.
3. Scrape the wood glue so that it is evenly distributed on the wooden strips.
4. Now glue the wooden strips (which already have glue) to the pallet, clamp them with two clamps and let the glue dry.
5. Now take out the measuring tape, measure and determine the distance between the hook (necklace and handThe chain will hang on it). Then take out the electric drill and select a drill bit that is close to the diameter of the screw to drill.
6. Screw the hook in. When done, the hooks should be in the same direction.
7. Then install the round hook inside the tray, which is used to hold earrings.
8. Wrap all the screws with masking tape and paint the pallet the color you like.
After the paint is dry, remove the masking tape and you can display all your jewelry~
