A very practical little waste recycling project, use discarded oil bottles to DIY bicycle handlebar windshields. Friends who like cycling can store them first and put them to use when the weather gets cooler. For specific DIY production steps, please refer to the detailed illustrated tutorial below.
Prepare larger plastic oil bottles, 2 are needed. You will also need scissors, cable ties, nails, markers, etc.
As shown in the picture above, use a pen to draw the part to be cut out on the plastic bottle
Punch a small hole in the mouth of the plastic bottle and secure it with a tie at the back; then cut off the unnecessary parts as shown in the picture.
In order to keep the bottle fixed on the handle, first place the bottle on the handle. There is usually a hole on the side of the handle that can be used to fix the bottle. Drive a long nail into the bottom of the bottle where the handle corresponds, and the nail will just fit into the hole in the handle. If your handle doesn't have a hole, you may need to use glue.
Put a tie through the hole to secure the mouth of the bottle
Use tape or adhesive tape on the cut area of ??the plastic bottle to prevent cutting your hands.
The windproof effect is pretty good. If you are interested, hurry up and make one!
