Nowadays, various fast food restaurants provide disposable chopsticks for packaging. It is not environmentally friendly to throw them away after using them once! I still hope that everyone can bring their own chopsticks to reduce human deforestation and maintain the harmonious coexistence between humans and nature. What should you do if you already have a lot of disposable chopsticks around? You can collect them, wash them and try the following crafting method to build a small wooden house. For the specific manual construction methods of the cabin, please follow the detailed illustrated tutorial below.
Materials:Collect as many disposable chopsticks as you can, don’t run out of materials halfway.
Tools: Scissors, knives, pliers, saw (if you have a cutting machine, you can use a cutting machine), hot melt glue (502 sticks beautifully).
Production steps:
1. Design the house layout (I drew the drawings myself).
2. Use square chopsticks to make the foundation (square chopsticks are easy to fix).
3. To build a wall, first glue two pillars on the sides of the chopsticks. Be sure to choose straight chopsticks, otherwise the wall will be glued crookedly.
4. The fence is designed with a buckle, which is easy to install, strong and beautiful.
5. When making the doors and windows of the wooden house, the windows are installed with openings reserved when bonding. The installation of the windows is very labor-intensive.
The front door of the cabin.
The door and window reservations must be of regular size.
Make windows with beveled edges to make them more beautiful.
The size is just right, snap it in and fix it with glue. I use hot melt glue to prevent it from flowing out.
Install the door frame.
After the front window is installed, the production of the rear window begins.
The production method is the same. Doors and windows are installed. spentIt takes more than 2 hours and the size is difficult to grasp. Either big or small.
6 Make the roof ridge and glue two triangular roof ridges.
Install the roof ridge and fix it to the wall with chopsticks inside to avoid cupping. Two railings flow out to facilitate the construction of a balcony at the back.
7. Make the roof. Use straight chopsticks for the roof and cross-bond them. Use a knife to cut the edges evenly.
8. Install the roof, hang it on the ridge, and glue it with a glue gun.
Please ignore the hot melt glue that pulls out the wire (just use a lighter to bake it off at the end).
9. For the front roof, install it according to the previous step (try not to let the hot melt glue flow out).
10. The cabin DIY is completed.
Place the Angry Birds doll that was made with plasticine earlier. It will look good!
