Life There are many fruit cans, beer bottles and other glass bottles around us. In fact, using our brains and hands, as long as we put some thought into dressing them up, we can give them a new life and put them as decorations at home. Not only does it have a warm personality, but it also enjoys the fun of DIY. The key is to recycle waste and save money.
DIY method:
1. First prepare an empty glass bottle after eating, mine is a condiment bottle. Wash it with dish soap, then tear off the outer trademark paper, and rub it back and forth with a stainless steel ball to wash away the offset left by the trademark paper.
Place the bottle cap on the cloth, spread the cotton, and draw a circle on each piece of hard paper.
Because The cotton is relatively soft, so I painted a second layer.
2 .Sew a circle along the edge of the cloth, overlap the hard paper and cotton, tighten the thread, then sew diagonally and secure.
3 .Add double-sided tape to the bottle cap, making sure it is fully adhered. Glue the prepared cloth cover on.
4 .Use a ruler to measure the thickness and circumference of the bottle cap. This bottle cap is 1cm thick and 22cm in circumference. The strip of fabric I cut is 3x24cm. Cut a 3x24 piece of cardboard, wrap the cloth strip around the paper and iron it, stick on the double-sided tape, and stick it around the bottle cap.
Be careful to fold in the extra 0.5cm on both sides before gluing, so that the joint will be more beautiful after gluing.
5 .Use a hidden needle to sew the cloth cover and strips in a circle to secure them firmly.
If you use white latex or strong glue to stick it firmly, you can omit this step.
6. Draw a cloud-like rectangular strip of cloth on the hard paper, and then cut it out of non-woven fabric.
Embroider your own English name, or some personalized characters.
There will be stitches on the back after the embroidery, and the transparent glass bottle will be visible from the back, which is not beautiful.
Cut out a rectangular cloud of the same size. Use double-sided tape Glue.
After gluing, stick double-sided tape, white latex or the like on the back, and stick it to the glass bottle.
7. Stick the prepared decorations on the bottle cap, or you can make any subsequent decorations you like.
A beautiful and lovely glass bottle is ready.
