I believe that for many people, wouldn’t it be cool to be able to hand-make such a realistic paper airplane? So let’s get started! This handmade work is divided into two major steps, first the origami process, and then the assembly. Before that, you need to prepare three square pieces of paper, which can be of different colors. You can freely match the colors, or even draw your favorite patterns and logo.
1. Wing part production:
1. Prepare three pieces of square colored paper, and match the colors to your liking; 2. Fold it in half, and then fold both sides in half again; 3. Fold the lines according to Figure (2), and pay attention to the dotted line reflection; 4. Fold it in half up and down, and then fold the upper half in half again. A reference crease; 5. Fold the lower half upward and make a reference crease; 6. Press the creases at 45 degrees on both sides; 7. Fold upwards as indicated by the arrow; 8. Fold and compact; 9. If As shown in the picture, fold it down; 10. Then press it to look like the picture; 11. Fold it down along the thick horizontal line, and then turn it out along the thin 45-degree line to form the shape in picture (12) What it looks like; 12. The result of folding in Figure (11); 13. Turn both sides outward; 14. Pay attention to the yellow marking line; 15. Fold upward along the marking line mentioned in the previous step; 16. The wing is done!
2. Production of the front part of the fuselage and landing gear:
17. Take out another square piece of paper and make a crease as shown in the picture; 18. Fold the arrow upwards in the lowermost reference picture (17); 19. Fold upwards with the arrow in the reference picture (18); 20. Fold it downwards. once; 21. Fold 45 degrees as shown; 22. Remove it; 23. Fold both sides inward along the 45 degree crease just now; 24. Open; 25. Fold both sides inward; 26. Start folding the landing gear wheels; 27 , fold the upper part downward for a short section; 28. Fold out the large landing gear wheels on both sides; 29. ??Press out these creases and turn them over, and you can see three equal vertical lines in the middle; 30. Fold along the equal vertical lines on both sides. ; 31. Fold the bottom upward; 32. Fold it at 45 degrees as shown in the picture, and then it is finished folding, and put it aside temporarily.
3. The rear and tail of the fuselage:
33. Take out the last piece of paper and fold it into four equal parts as shown in the picture; 34. Determine the shape of the tail and vertical tail as shown in the picture; 35. Fold it as shown in the picture; 36. Press out the crease; 37. Then take Open, get discountmark; 38 unfold and fold the left side inwards; 39. Shape as shown in the picture; 40. Form the shape in the picture; 41. Fold as shown by the arrow in picture (40), and do the same on the other side; 42. A sharp corner at the tail wing Fold inward and do the same on the other side. In this way, all three parts of the airplane are folded!
4. Combination:
43. Three components; 44. The insertion relationship between the wing and the front of the fuselage; 45. The rear half of the fuselage is inserted; 46. Fold in half from the central axis of the aircraft to form the appearance in the picture; 47. Get off the plane Fold the wings downward; 48. Fold a small corner; 49. Fold the small corner inward; 50. Fold the lower wing upwards, and finally, the final shaping adjustment.
5. Final effect:
After doing this step, you can see the general appearance. Refer to the final effect, adjust and fold it, and look at the final result. A cool paper airplane with a very old age is successful. At this moment, On the aircraft, you can freely use your imagination and show your painting talent.
