Illustration of folding method of simulated paper airplane - B-2 "Ghost". Have you seen it? Do you think it’s cool? Do you want to own it right away? This paper airplane has a very unique shape, which determines that it has unique capabilities. Compared with other paper airplanes, it is flexible and Small and very light. The B-2 bomber, the prototype of this paper plane, has a very powerful function-it can become invisible. Isn’t it amazing? Let me show you its secrets next!
Step one: Choose a piece of paper with an aspect ratio of 2:1, be sure to remember it.
Step 2: Fold it once lengthwise, making one side wider than the other.
Step 3: Fold the wide side in half twice.
Step 4: After folding, fold it over according to the symmetry line.
Step 5: Fold upward at the marked line.
Step 6: Avoid the thick edge in the front, fold the tail downward and inward.
Step 7: Fold the folded corner back up a little, being careful not to let the corner come up.
Step 8: Fold the wings and cut them according to the lines in the picture. Be careful not to cut the wrong side, cut from front to back.
Step 9: Then fold the cut part in half, just for marking. It doesn’t matter if the position is half or not, but the two sides must be completely symmetrical!
Step 10: Then fold the cut part up using the root and fold line as shown in the picture, and then cut it out.
Step 11: Still paying attention to symmetry, then cut out the remaining parts as shown in the picture.
Step 12: Next is the fixing step. The black frame is the part of the transparent tape. Symmetrical to both sidesFor transparent glue, it is best to cut twice the length at one time, then cut it symmetrically, and then paste it completely symmetrically in the same position.
Step 13: Side view, tape is attached to the middle part so that it will not fall apart.
Step 14: There are a lot of tapes on the abdomen, and they need to be applied flatly to achieve a good-looking effect. There should be no bulge. If it is really a bulge, then make the other side bulge a little. It is important to achieve symmetry and maintain beauty!
Step 15: The machine head can be fixed by itself. Then fold it in half, bring both sides together and cut it symmetrically as shown. It is recommended to use a carving knife. Children should pay attention to their hands so as not to hurt themselves.
Step 16: Open and arrange the wings, and tilt up the two small corners at the back of the middle. Do you want a horse?Get hands-on and turn it into your beloved little baby right away!
