I believe many children know the little crab. So the editor of the Production Department will teach you how to fold crabs today. The crabs that run rampant on the beach appeared todayOrigami In the comprehensive illustrated tutorial, if you also like this kind of guy who is full of "fearless fighting spirit", you can now pick up the paper on hand to make this hand-made origami crab. This hand-made origami crab is very similar to the previous origami spider. It is true that some simple changes have been made on the basis of the origami spider. However, the unhindered feeling of the crab is still very obvious and prominent. It is worth trying to make it yourself. oh!
1. First, turn the colored side of the paper upward. It is also very convenient to use white paper directly. According to the origami diagram, the diagonal lines are folded into peak marks, while the horizontal and vertical lines are folded into valley marks. After the folds are made, the paper is restored.
2. Then fold the four corners toward the middle of the paper.
3. Flip the paper model.
4. According to the diagram, make the diagonal line into a peak mark, fold the lower left part and the upper right part of the diagonal line together in half, and make two horizontal and vertical valley marks at the same time.
5. Then fold the right corner of the upper surface of the origami model pointed by the yellow arrow to the left until the fold is in the middle.
6. Then follow the direction pointed by the small yellow arrow in the origami diagram, fold it downward and flatten it. At this time, the sides pointed by the thick yellow arrows on the left and right sides will expand to both sides.
7. Flatten the left and right corners of the quadrilateral made in the previous step and fold them in half according to the crease in the picture.
8. At this time, unfold the structure in the middle of the origami model.
9. Then fold the edge pointed by the yellow arrow downwards, and fold according to the crease marked in the middle.
10. Then flatten the four sides pointed by the four yellow arrows.
11. Then fold the triangle under the purple crease upward.
12. Fold the other three corresponding corners of the entire origami model according to steps six to eleven.
13. Then pull the top corner of the origami model, that is, the corner indicated by the end of the yellow triangle, to the left and right sides.
14. Then fold the triangle above the purple peak mark inward.
15. Then fold the top corner pointed by the yellow arrow back. That is to restore the folding in step 13.
16. Fold the other three parts at corresponding positions in the origami model according to steps 13 to 15.
17.Fold the left and right sides of the origami model in half according to the vertical creases in the illustration. The folding range does not need to be too large.
18. Loosen the area pointed by the arrow (the paper on the upper surface of the origami model).
19. Then fold the origami model in half according to the creases in the illustration.
20. Then fold the triangle in the lower half of the origami model upward according to the crease.
21. Follow steps 17 to 20 for the other three corresponding positions in the origami model.
22. Fold the two triangles marked by the middle crease in the origami diagram in half to form the pattern as seen in step 23.
23. Then flatten the edge pointed by the yellow arrow.
24. Follow the steps 22 to 23 on the structure on the back of the origami model. Flip paper model.
25. Fold the triangle at the bottom of the crease upward.
26. Then fold the left and right triangles below the crease to the left and right sides according to the crease.
27. Then fold the triangle pointed by the yellow arrow downward. When folding, pay attention to the two creases sandwiched at an acute angle. The lower one is the peak mark, and the upper one is the valley mark. , the produced style can be seen in Figure 28.
28. Fold the upward triangle on the left according to the operation method in step 27. Then press and fold the upward triangle pointed by the yellow arrow at this time to the left and right sides. The operation method is the same as step 27. The small triangles in the illustration indicate where the creases will occur.
29. Flip the paper model.
30. Then fold the triangle pointed by the yellow arrow downward, using the same method as step 27.
31. Fold the end of the triangle worked in the previous step forward.
32. Fold the top corner pointed by the yellow arrow inwards.
33. At this time, fold the newly formed inner corner (pointed by the yellow arrow) inward again.
34. Press and fold the outer edge of the origami model pointed by the yellow arrow inwards.
35. Flip the paper model.
36. Then fold the two sides pointed by the yellow arrows inward. Treat the remaining 5 legs in the same way.
37. Then fold the top of each leg inwards.
38. Then fold the bottom corner pointed by the yellow arrow at the bottom of the origami model upwards, and fold it in half to the position pointed by the yellow arrow at the top.
39. Such a handmade origami crab is complete!
